Created with Sketch. Created with Sketch.

Fabrication Parts

Listing of all parts to build your own stuff! 

  • AFE DRY FILTER 4 inch inlet

      Pro DRY S Filter Media:This filter features three layers of oil-free synthetic media and requires no oil during maintenance to provide maximum convenience. Its progressive layering provides great filtration efficiency and dust holding...

    Sale: $65.00
    Add to Cart
  • Ez drain hose and hose attachment

    Ez drain hose and hose attachment

    Straight Hose End for small body(part number EZ-106,EZ-101 - EZ-115, EZ-124, EZ-125) valves.  Just screw in the Hose End to the EZ Oil Drain Valve and tighten with a small wrench. The Hose Ends are interchangeable, making it a breeze to remove...

    Sale: $10.00
    Add to Cart
  • Stainless Diesel Pre Filter

    Stainless Diesel Pre Filter

      Extend the life of your Cleanable or Dry filter with a custom Stainless Diesel filter wrap. This filter wraps provide an extra layer of protection and shield your air filter from the majority of dust and dirt particles that stick to your filter,...

    LISTED: $50.00
    Sale: $30.00
    Choose Options
  • Stainless Steel Exhaust/Intake Flex Section - 6" Long

    Flex sections like this are designed to allow for engine movement and vibration. If you build your entire exhaust or intake out of solid pipe with nothing to flex, something will probably break. Most people use flex sections like these in exhaust...

    LISTED: $60.00
    Sale: $30.00
    Choose Options
  • 2' Straight Stainless Steel Pipe

    Use this pre-bent section of 304 Stainless Steel Pipe for any project. Works extremely well for intercooler pipe fabrication or exhaust fabrication. Stainless steel is extremely durable and will not rust, and is easy to weld to many other components...

    LISTED: $60.00
    Sale: $40.00
    Choose Options
  • 2' Mandrel Bent Stainless Steel 90° Bend

    Use this pre-bent section of 304 Stainless Steel Pipe for any project. Works extremely well for intercooler pipe fabrication or exhaust fabrication. Stainless steel is extremely durable and will not rust, and is easy to weld to many other components...

    LISTED: $60.00
    Sale: $40.00
    Choose Options
  • 2' Mandrel Bent Stainless Steel 45° Bend

    Use this pre-bent section of 304 Stainless Steel Pipe for any project. Works extremely well for intercooler pipe fabrication or exhaust fabrication. Stainless steel is extremely durable and will not rust, and is easy to weld to many other components...

    LISTED: $60.00
    Sale: $40.00
    Choose Options
  • 2' Mandrel Bent Aluminum 180° Bend

    Use this pre-bent section of aluminum pipe for any project. Works extremely well for intercooler pipe fabrication or intake pipe fabrication. Aluminum is very lightweight while being resistant to rust. The smooth mandrel bends create optimal airflow...

    LISTED: $50.00
    Sale: $30.00
    Choose Options
  • SALE

    6061 Aluminum Weld on Map Sensor Bung

    This is a Aluminum 6061 T6  Machine in house Map sensor. This is used in a ton of Application Like the 6.7 Cummins and 5.0 Cummins. Comes with new Bolt!  This also works for some air Temp sensors.

    LISTED: $50.00
    $40.00
    Buddy Price: $30.00
    Add to Cart
  • V-Band Clamp

    These 304 stainless steel V-band clamps are designed for clamping exhaust components together. These V-band clamps and rings are numbered based on the inner diameter of the pipe. Confused? just look at the Actual Clamping Ability below...

    LISTED: $55.00
    Sale: $30.00
    Choose Options
  • SALE

    4.0" Stainless Steel V-Band Clamp Rings (Set of 2)

    V-band assemblies are the most versatile and reliable way to connect your exhaust components. With V-band assemblies, you achieve the flexibility to install and swap your exhaust parts easily while maintaining the sturdiness and leak-proofing of a welded...

    LISTED: $80.00
    $60.00
    Buddy Price: $50.00
    Add to Cart
  • Aluminum V-Band Clamp Rings (Set of 2)

    Aluminum V-band assemblies with O-rings are the strongest and most leakproof way to connect your intake components. If you're running more than 75 PSI, or if you don't mind putting in some extra work to get an especially nice looking and leakproof...

    LISTED: $50.00
    Sale: $40.00
    Choose Options
  • 2' Straight Aluminum Pipe,

    Use this section of aluminum pipe for any project. Works extremely well for intercooler pipe fabrication or intake pipe fabrication. Aluminum is very lightweight while being resistant to rust. The smooth mandrel bends create optimal airflow and ease of...

    LISTED: $50.00
    Sale: $40.00
    Choose Options
  • 2' Mandrel Bent Aluminum 90° Bend,

    Use this pre-bent section of aluminum pipe for any project. Works extremely well for intercooler pipe fabrication or intake pipe fabrication. Aluminum is very lightweight while being resistant to rust. The smooth mandrel bends create optimal airflow...

    LISTED: $50.00
    Sale: $40.00
    Choose Options
  • 2' Mandrel Bent Aluminum 45° Bend,

    Use this pre-bent section of aluminum pipe for any project. Works extremely well for intercooler pipe fabrication or intake pipe fabrication. Aluminum is very lightweight while being resistant to rust. The smooth mandrel bends create optimal airflow...

    LISTED: $50.00
    Sale: $40.00
    Choose Options