43% + More flow over factory!
99% + More Efficient!*
Better throttle response*
Flow more air into your turbo.
Ton more Turbo sound!
Direct bolt on!
Simple install and will not void warranty.*
15-20 hp gain*
Works with tuning or Factory stock trucks!
This is a Fully fab 4 Inch thick wall aluminum pipe.
One 5 ply silicon boot that is rated for heat, cold, boost, and suction.
All stainless clamps.
Powder Coated By Kcin Coating
The 4 inch aluminum pipe has the factory sensor ports welded on the back side for clean looks and install.
Life time warranty!
OUT DO ANY INTAKE ON THE MARKET! 100% more power then any other brand!
Now options to add on our 3.5 Fab turbo intake.
This will replace the choke down small plastic intake on the truck.
With or With Out CCV bard "hint if you have a hose going to the factory then you need the barb!" otherwise with out is for race use!
Fab Turbo Inlet pipes gains
better throttle response*
3-6 hp gain*
Better fuel economy*
Less Heat soak air going into the turbo*
CCV HOSE BARB OPTION IS FOR FAB TURBO INTAKE!
CCV - CRANK CASE VENT
What about taking in "hot air"
Well first how many diesel race truck you see with out side cold air? Few to none. The turbo compresses the air "heating it up" that's why you have Intercooler to chill the air down. Next when you have less restriction to the turbo you have faster spooling, less restriction lets the air into the turbo have less chance to heat up, faster spool up with less restrictions then drop the Compressed air to the intercooler letting the job of the intercooler to be more efficient!
What about "Dirty bay air"
Well that's what the job of the air filter is for. Better filters that flow more but clean more will be the aid. If you really break down the design you still flow lots of outside air into the filter directly as factory. Now once again just like factory, the environment of where you drive will just dictate how fast the filer gets dirty and needs to be cleaned. We also have pre filters from stainless diesel that help with filter life!
Kits comes with
1 - Cone filter.
1 - Fab air intake pipe with sensor bungs welded in.
1 - 5 ply silicon boot.
3 - stainless steel clamps
NOT SOLD OR SHIP TO CALIFORNIA!
ANY ORDERS IN UNITED STATES WILL NOT BE SUPPORTED FOR ON HIGHWAY USE!
RAW AND UNFINISHED CAN AND WILL MOST LIKELY HAVE SCRATCHES AND SMALL DENTS IN THE PARTS! THEY WILL BE SHIP AS IS! ALL RAW AND UNFINISHED PARTS ARE AS IS!
CFT PERFORMACNE INC. NOT HELD RESPONSIBLE FOR ANY USE OF THESE PRODUCTS
5 Reviews Hide Reviews Show Reviews
Easy install, fast shipping, more turbo whistle, better mpg, and free t-shirt. Great product, I highly recommend it. Thank you Cft performance.
Good quality item, love the whistle noise it gives the turbo. Improves the acceleration response when you hit the pedal.
Pros- Quick processing, quick shipping, solid product! Cons- No instructions in box and the ones online are fairly vague. Says to refer to YouTube channel but only one intake video and it’s only the tube not the full fab
Just wish it came with some directions, it wasn't difficult but just wanted a guideline to go by. Looked for a youtube video but didn't find one on it. The CAI is a great product.
Easy to install. I got the gun metal powder coat it looks great. I can really here the turbo now.