Created with Sketch. Created with Sketch.

Shop All

  •  2" X 50' Fiberglass Exhaust/Header Wrap

    2" X 50' Fiberglass Exhaust/Header Wrap

    Exhaust/header wrap will decrease your engine bay temperature, improve cooling and add horsepower. Please read this description thoroughly for more information about this very helpful but often misused product. When you add horsepower to an engine, one...

    $40.00
    Choose Options
  • Aluminum V-Band Clamp Rings (Set of 2)

    Aluminum V-band assemblies with O-rings are the strongest and most leakproof way to connect your intake components. If you're running more than 75 PSI, or if you don't mind putting in some extra work to get an especially nice looking and leakproof...

    MSRP: $50.00
    $40.00
    Choose Options
  • -10 AN 180 Degree Fitting

    These Aluminum Fittings are specially designed to work with our Braided Stainless Steel Lines. Compatible with the following fluids: High octane gasoline, up to 117 Octane or higher Regular gasoline Ethanol (E85 or E100) Diesel...

    MSRP: $35.00
    $20.00
    Choose Options
  • -10 AN 45 Degree Fitting

    These Aluminum Fittings are specially designed to work with our Braided Stainless Steel Lines. Compatible with the following fluids: High octane gasoline, up to 117 Octane or higher Regular gasoline Ethanol (E85 or E100) Diesel...

    MSRP: $35.00
    $20.00
    Choose Options
  • -10 AN 90 Degree Fitting

    These Aluminum Fittings are specially designed to work with our Braided Stainless Steel Lines. Compatible with the following fluids: High octane gasoline, up to 117 Octane or higher Regular gasoline Ethanol (E85 or E100) Diesel...

    MSRP: $35.00
    $20.00
    Choose Options
  • -10 AN Braided hose

    THIS IS PRICED PER FOOT!    These Braided Stainless Steel Lines are specially designed to work in any automotive project. Compatible with the following fluids: High octane gasoline, up to 117 Octane or higher Regular gasoline Ethanol...

    MSRP: $12.50
    $6.00
    Add to Cart
  • -10 AN Straight Fitting

    These Aluminum Fittings are specially designed to work with our Braided Stainless Steel Lines. Compatible with the following fluids: High octane gasoline, up to 117 Octane or higher Regular gasoline Ethanol (E85 or E100) Diesel...

    MSRP: $35.00
    $20.00
    Choose Options
  • 1/2 NPT male to -10 AN Straight

    These Aluminum Fittings are specially designed to work with our Braided Stainless Steel Lines. Compatible with the following fluids: High octane gasoline, up to 117 Octane or higher Regular gasoline Ethanol (E85 or E100) Diesel...

    MSRP: $20.00
    $10.00
    Choose Options
  • 13-14 Cummins Dual Radiator Delete kit

    Duel radiator delete kit!   Tired of the plastic factory y bridge going out?   Why did factory put 2 radiators in place when one dose the job?   Don't want to spend $200 plus in the 2 aftermarket y bridges to keep...

  • 13-17 Cummins inter cooler pipe set

    13-17 Cummins inter cooler pipe set

    New hot side and cold side piping.  New 3.5 inch aluminum hot side pipe to help reduce temps. New cold side pipe is 3.5 inch and out flows the stock pipe by over 38%   This kit comes with all boots 8 stainless  T-Bolt clamps 2 New 3...

    MSRP: $425.00
    $360.00
    Choose Options
  • SALE
    EZ Drain valve for easy oil drains

    14-18 Eco Diesel Catch Can

    This is the oil catch can made just for the Eco Diesel! Made fully out of 6061 Aluminum. Last FOREVER. Built in Bottom EZ Drain Valve for easy oil drain. "106 Valve" Double baffle system. "never clean, clog, or freeze!"     This is the...

    $165.00 - $175.00
    Choose Options
  • 2' Mandrel Bent Aluminum 180° Bend

    Use this pre-bent section of aluminum pipe for any project. Works extremely well for intercooler pipe fabrication or intake pipe fabrication. Aluminum is very lightweight while being resistant to rust. The smooth mandrel bends create optimal airflow...

    MSRP: $50.00
    $30.00
    Choose Options
  • 2' Mandrel Bent Aluminum 45° Bend,

    Use this pre-bent section of aluminum pipe for any project. Works extremely well for intercooler pipe fabrication or intake pipe fabrication. Aluminum is very lightweight while being resistant to rust. The smooth mandrel bends create optimal airflow...

    MSRP: $50.00
    $40.00
    Choose Options
  • 2' Mandrel Bent Stainless Steel 45° Bend

    Use this pre-bent section of 304 Stainless Steel Pipe for any project. Works extremely well for intercooler pipe fabrication or exhaust fabrication. Stainless steel is extremely durable and will not rust, and is easy to weld to many other components...

    MSRP: $60.00
    $40.00
    Choose Options
  • 2' Mandrel Bent Stainless Steel 90° Bend

    Use this pre-bent section of 304 Stainless Steel Pipe for any project. Works extremely well for intercooler pipe fabrication or exhaust fabrication. Stainless steel is extremely durable and will not rust, and is easy to weld to many other components...

    MSRP: $60.00
    $40.00
    Choose Options
  • 2' Straight Aluminum Pipe,

    Use this section of aluminum pipe for any project. Works extremely well for intercooler pipe fabrication or intake pipe fabrication. Aluminum is very lightweight while being resistant to rust. The smooth mandrel bends create optimal airflow and ease of...

    MSRP: $50.00
    $40.00
    Choose Options
  • 2' Straight Stainless Steel Pipe

    Use this pre-bent section of 304 Stainless Steel Pipe for any project. Works extremely well for intercooler pipe fabrication or exhaust fabrication. Stainless steel is extremely durable and will not rust, and is easy to weld to many other components...

    MSRP: $60.00
    $40.00
    Choose Options
  • 2013-2017 2500-3500 air intake horn

    2013-2017 2500-3500 air intake horn

    Fully fab 4 inch intake. Will delete the intake valve. Made fully out of aluminum. Comes with all bolts and hardware. Big 4 inch inlet.  Clears factory Injector line! Comes with 4-3.5 inch boot. 2 Stainless T-Bolt clamps. WELD BUNG OPTIONS...