ALL NEW BOLT ON CCV CATCH CAN!
Traps all the oil in the ccv system!
Works both factory stock to tuned XD Cummins Trucks.
This helps prolong the life of everything from turbo, inter cooler pipes, inter cooler to intake.
Takes the oil vapor made in the crank case to the turbo out!
no oil build up inside the ic pipes so on!
Multi baffle design! NEVER CLEAN!
Ez Drain Valve for simple oil draining!
Full 6061 Aluminum construction!
DOSE NOT VOID FACTORY WARRANTY*****
WORKS BOTH FACTORY STOCK AND TUNED TRUCKS.*******
This is our trade mark design that has been used and working on 1K plus vehicles since 2010!
This will only work with Factory Charge tubes and the new CFT Performance EGR solution Charge tubes as they will have the new mounting tab added! "CFT Performance Charge tube updates happen on all parts after Ship date 1/23/2018"
PLEASE PUT IN ORDER COMMENTS ON ALL CUSTOM COLOR POWDER COAT OR EMAIL AND CALL FIRST!!! POWDER COAT OPTIONS AVG NEXT DAY BUT CAN HAVE LEAD TIME OF 1-3 WEEKS!
INCLUDED IN KIT
1 - Aluminum FULL CATCH CAN
1 - New Hose
1 - Hardware for install
RAW AND UNFINISHED CAN AND WILL MOST LIKELY HAVE SCRATCHES AND SMALL DENTS IN THE PARTS! THEY WILL BE SHIP AS IS! ALL RAW AND UNFINISHED PARTS ARE AS IS!
CFT Performance INC. is not responsible for the use of this catch can. Catch cans are built to order and as all fab products can not be return or refunded! CFT Performance INC. Can not Guarantee error free usage of the product!
Videos Hide Videos Show Videos
9 Reviews Hide Reviews Show Reviews
I will be buying more products from this company I like them a lot
Nicely made, only issue is hose goes right over top of oil cap. Have too disconnect hose to put funnel and oil in. I think if the one inlet was about an inch more to the right it would be great. I’m no engineer BUT, I’m sure there is a reason for it.
Easy install and high quality.
everything you need is in the kit...clamps, hose, even the bolt to mount it. Literally took 5 minutes to install. I got the wrinkle blue powder coat, the finish is perfect and looks great next to the CFT intake.
I really didn't like the fit and location. Both the hose to the valve cover and the radiator hose were kinked after install. The baffle inside seemed too simple. I do appreciate the R&D though.
follow directions but the hose from the valve cover had more of a kink then i wanted, so off to the parts store for a 3/4" plastic heater hose 90 and 2 hose clamp. it is now working like it was designed.
Seems to be pretty solidly built. Easy to install other than I had to trim the hose that was supplied but no biggie. Wasn't the color I ordered but oh well.
Very easy install. Great extremely well crafted product. I will be definitely ordering more cut products in the future. You won’t be disappointed
Easy install and fabulous craftsmanship! Will be ordering more CFT products soon. Also Josh answers all questions you may have.